User Waypoint List - Garmin GPS 165TSO Pilot's Manual

WAYPOINTS & DATABASE

User Waypoint List

User Waypoint List.
Renaming a user waypoint.
40
The third page available from the GPS 165' s WPT key is the user waypoint list,
which can be used to quickly scan, review, rename or delete user waypoints.
To display the user waypoint list:
W O
1. Press and use to display the user waypoint list.
2. To scroll through the list, rotate
The total number of user waypoints is displayed at the top of the page, with user
waypoints listed two at a time in alphabetical order. The scrolling arrow prompt,
located at the top left of the page, will indicate which direction to scroll to view addi-
tional waypoints. The status of each waypoint, if applicable, will be displayed to the
right of the identifier. A status will appear when it is the active to waypoint, part of
an active or stored route or a proximity waypoint. To edit, rename or delete way-
points, the cursor must highlight the desired waypoint.
To highlight a waypoint:
C O
1. Press and use to highlight the desired waypoint.
To edit a highlighted waypoint:
E
1. Press to obtain the waypoint position page. Edit the waypoint as described on page 37.
To delete a waypoint from the list:
1. Highlight the desired waypoint and press
To rename a waypoint from the list:
1. Highlight the desired waypoint. Use
identifier for the waypoint.
E
2. Press on the confirmation page to change the name, or press
K
.
\ E
. Press to confirm the deletion.
K O
and to enter a new
\
to cancel.