C Onnections; Sing A - Garmin Apollo SL30 COMM Installation Manual

SL30
+GS Flag 28
-GS Flag 32
GSI Up
30
GSI Down 31
ILS Enbl 33
Composite 19
Gnd 37
NOTES:
Figure 19 - SL30 NAV to Sandel SN3308 Converter Connections
Apollo SL30 Installation Manual
37-Pin Connector
1. Use shieled cable for resolver signals.
2. Connect cable shields to the mounting frame: pigtails < 1.25 inches.
3. Connect shields chassis ground at both ends of each shielded cable.
4. Refer to Limitations on Using a Composite Signal paragraph in this chapter.
5. Not all indicator connections are shown, only those interfacing to the SL30. Consult the
appropriate installation manuals for complete wiring instructions.
Sandel SN3308
15 +GS Flag
33 -GS Flag
GSI Up
16
GSI Down
34
NAV 1 NAV 2
27 8 ILS Enrgze
29 10 Composite
Installation
29