Ther Required Aterials; Special Tools Required - Garmin Apollo SL30 COMM Installation Manual

Introduction
O R
THER EQUIRED
The SL30 is intended for use with standard aviation accessories. External devices required for
various installations are listed below. Depending upon the installation, this will include items
such as:
• back course annunciator
• a CDI or HSI
• a Comm antenna
• NAV antenna
• NAV antenna splitter (if dual SL30)
• a microphone(s)
• a speaker or headphone
• audio panel
S T
PECIAL OOLS
Crimp Tool
A crimp tool meeting MIL specification M22520/1-01 and a positioner/locater are required to
ensure consistent, reliable crimp contact connections for the rear 15-pin and 37-pin
connectors. These tools are available from:
For pin P/N 245-0022
Astro Tool Corp.
21615 SW TV Highway
Beaverton, OR 97006
Crimp tool:
Positioner:
For pin P/N 245-0027
ITT Cannon
1851 E. Deere Ave.
Santa Ana, CA 92705-6500
Insertion tool:
Regular duty Crimp tool:
Regular duty Locator tool:
Heavy duty Crimp tool:
Heavy duty Locator tool:
6
M
ATERIALS
R
EQUIRED
Phone (503) 642-9853
Fax (503) 591-7766
Astro Tool part #615708
Astro Tool part #616356
Phone (714) 261-5300
Fax (714) 575-8324
ITT part # 274-7006-000 (Desc. CIET-20HD)
ITT part #995-0001-585 (Desc. M22520/1-01)
ITT part #995-0001-244 (Desc. TH25)
ITT part #995-0001-584 (Desc. M22520/2-01)
ITT part #995-0001-604 (Desc. M22520/2-08)
Apollo SL30 Installation Manual