Garmin Apollo SL30 COMM Installation Manual page 36

Installation
SL30
Rslvr{H} 24
Rslvr{C} 25
Rslvr{D} 7
Rslvr{E} 26
Rslvr{F} 16
Rslvr{G} 34
+NAV Flag 10
-NAV Flag 29
+GS Flag 28
-GS Flag 32
+TO Flag 12
+FR Flag 11
GSI Up
30
GSI Down 31
CDI Left 14
CDI Right 13
Back Crse 15
ILS Enbl 33
NOTES:
Figure 18 - SL30 NAV to Sandel Discrete Connections
28
Lamp Voltage
From Dimmer
Amber
Circuit.
BC
Note 5
Light
37-Pin Connector
1. Use shieled cable for resolver signals.
2. Connect cable shields to the mounting frame: pigtails < 1.25 inches.
3. Connect shields chassis ground at both ends of each shielded cable.
4. Reference Sandel installation manual for switching NAV signals with GPS.
5. BC annunciator may be implemented in future software revisions of the SN3308.
Refer to Sandel installation manual.
6. Not all indicator connections are shown, only those interfacing to the SL30. Consult the
appropriate installation manuals for complete wiring instructions.
Sandel SN3308
13 OBS In
32 COS
28 VREF
14 SIN
18 +NAV Flag
36 -NAV Flag
15 +GS Flag
33 -GS Flag
17 +TO Flag
35 +FR Flag
16 GSI Up
34
GSI Down
37 CDI Left
19 CDI Right
Apollo SL30 Installation Manual