Garmin Apollo SL30 COMM Installation Manual page 33

SL30
Rslvr{H} 24
Rslvr{C} 25
Rslvr{D} 7
Rslvr{E} 26
Rslvr{F} 16
Rslvr{G} 34
+NAV Flag 10
-NAV Flag 29
+GS Flag 28
-GS Flag 32
+TO Flag 12
+FR Flag 11
CDI Left 14
CDI Right 13
GSI Up 30
GSI Down 31
Back Crse 15
ILS Enbl 33
NOTES: 1. Use shieled cable for Resolver signals
2. Connect cable shields to the mounting frame: pigtails < 1.25 inches
3. Connect shields chassis ground at both ends of each shielded cable
4. Reference the ACU installation manual if installing NAV/GPS source selector.
5. Installer should verify that the STEC IND-351A contains the proper
annunciator, i.e., BC backcourse.
Figure 15 - SL30 NAV to STEC IND-351A Connections
Apollo SL30 Installation Manual
To Auto-Pilot
High Sense
37-Pin Connector
Installation
STEC IND-351A
1 Rslvr{H}
2 Rslvr{C}
3 Rslvr{D}
5 Rslvr{E}
4 Rslvr{F}
6 Rslvr{G}
7 +NAV Flag
8 -NAV Flag
15 +GS Flag
16 -GS Flag
9 +TO Flag
10 +FR Flag
11 CDI Left
12 CDI Right
13 GSI Up
14 GSI Down
24 BC Ann.
25 Ann. Dim
23 13.8 Dim
22 27.5 Dim
21 Ground
Backlight Dimmer
28 V Systems
(GND if 14V)
Backlight Dimmer
14 V Systems
BC Annunciator
Dimmer 12V max
25