Figure 196 Displaying Log Categories Example; Figure 197 Displaying Log Parameters Example - ZyXEL Communications P-334U User Manual

Table 130 RFC-2408 ISAKMP Payload Types (continued)
LOG DISPLAY
SIG
NONCE
NOTFY
DEL
VID
Log Commands
Go to the command interpreter interface.
Configuring What You Want the ZyXEL Device to Log
1 Use the sys logs load command to load the log setting buffer that allows you to configure
which logs the ZyXEL Device is to record.
2 Use sys logs category to view a list of the log categories.

Figure 196 Displaying Log Categories Example

3 Use sys logs category followed by a log category to display the parameters that are
available for the category.

Figure 197 Displaying Log Parameters Example

4 Use sys logs category followed by a log category and a parameter to decide what to
record.
Appendix E Log Descriptions
PAYLOAD TYPE
Signature
Nonce
Notification
Delete
Vendor ID
Copyright (c) 1994 - 2004 ZyXEL Communications Corp.
ras>?
Valid commands are:
sys exit
ip ipsec
certificates cnm
ras>
ras> sys logs category access
Usage: [0:none/1:log/2:alert/3:both] [0:don't show debug type/
1:show debug type]
P-334U/P-335U User's Guide
ether aux
bridge bm
8021x radius
303