P-334U/P-335U User's Guide
After you see the Firmware Upload In Process screen, wait two minutes before logging into
the ZyXEL Device again.
Figure 148 Upload Warning
The ZyXEL Device automatically restarts in this time causing a temporary network
disconnect. In some operating systems, you may see the following icon on your desktop.
Figure 149 Network Temporarily Disconnected
After two minutes, log in again and check your new firmware version in the Status screen.
If the upload was not successful, the following screen will appear. Click Return to go back to
the Firmware screen.
Figure 150 Upload Error Message
22.2 Configuration Screen
See the Firmware and Configuration File Maintenance chapter for transferring configuration
files using FTP/TFTP commands.
224
Chapter 22 Tools