Loading Paper; Paper Trays Air Adjustment - Xerox Docucolor 5000 User Manual

Loading paper

Paper trays air adjustment

Do c u Co lo r 50 0 0 Us e r Gu i d e
Loading paper in Trays 3 and 4 is the same as it is for Trays 1 and
2; therefore, use the same procedure for loading paper. Refer to
page 3-11 for the procedure.
Blowers help control the environmental conditions in the paper
trays to ensure optimum print capability:
• Each paper tray has two blowers. The lead edge blower is on
at all times and produces heated air if one of the following
selections are made: Coated paper, Transparencies, or plain
2
paper 106 g/m or heavier. The trail edge blower is on at all
times and does not produce heated air.
• The paper trays also have air adjustment levers on the drawer
to regulate the direction of the air. If the paper weight is
between 60 and 256 g/m
should be toward the front of the tray. If the paper weight is
between 257 and 300 g/m
should be positioned toward the rear of the tray.
Slide the Air Adjustment Levers to accommodate the weight of the
paper loaded. Slide the lever forward for paper between 60 and
2
256 g/m . For papers between 257 and 300 g/m
toward the back of the tray.
4. A c c es s o r i e s
2
, the position of the air adjust levers
2
, the position of the air adjust levers
2
, slide levers
4-5