4. A c c e s s or ie s
4- 8
With the HCS you can:
•
Select Offset Mode when collated sets are sent to the Stacker
Tray.
•
Send documents to the top tray.
•
Send sets of different sizes to either the Stacker Tray or the
top tray.
NOTE: Do not stack larger sets on top of smaller sets. Jams
could result.
•
Send a sample set to the top tray.
•
Chain two High Capacity Stackers to the digital press and
send collated sets to HCS 1, HCS 2 or both High Capacity
Stackers.
•
Send collated sets through the stacker to another connected
finishing device.
D o c uC ol o r 50 00 Us e r G ui d e