Manual Mode (For Checking The Sewing Pattern By Turning The Machine Pulley By Hand) - Brother LH4-B800E Instruction Manual

6. CHECKING THE SEWING PATTERN
6-2. Manual mode (for checking the sewing pattern by turning the machine
pulley by hand)
(3)
(7)
(8)
2136Q
1. Press the SELECT key (13) to change the mode to automatic mode. Use the program No. keys (7) and
(8) to select the number for the program to be checked, and then press the ENTER key (17).
(The program number will stop flashing.)
2. Press the SELECT key (13) to change the mode to manual mode.
("H***" and the number of stitches in the selected program will appear in the parameter display LED (14).)
3. Depress the treadle from the neutral position [A] to the 2nd step [C].
(The work clamp will drop.)
4. Turn the machine pulley by hand.
(The needle zigzag and feed mechanisms will each advance by one step each time the machine pulley is
turned.)
(If the knife has been set to operate, the buzzer will sound and "C-On" will appear.)
5. Stop turning the machine pulley when "Ho" appears in the parameter display LED (14) and the pulley is at
the needle up stop position.
6. When the treadle is depressed once more to the 2nd step [C], the sewing machine will move to the home
position, and the work clamp will rise.
7. Press the SELECT key (13) to change the mode to automatic mode.
• If you turn the machine pulley to the needle up stop position and press the SELECT key (13) during
the checking operation, the mode will change to test feed mode.
• If you would like to stop checking before the operation has completed, press the RESET key (3). The
sewing machine will move to the home position, and the work clamp will move to the neutral position.
56
(13) (17)
A
(14)
C
HE-8000
2135Q