Installing The Power Switch; Installing The Bed Base - Brother LH4-B800E Instruction Manual

4-5. Installing the power switch

(1)
(2)
(3)

4-6. Installing the bed base

(7)
(6)
(7) (5)
(6)
(5)
(1)
(3)
(2)
(3)
(4)
(2)
(6)
(5)
1. Install the power switch (1) with the two screws (2).
2. Secure the power switch (1) cord and the motor
(4) cord with the six staples (3).
(4)
2053Q
1. Place the bed base (1) on top of the work table,
and insert the collars (2).
2. Provisionally tighten the flange nuts (4) onto the
bolts (3), and then position the bed base (1).
3. Install the bed base (1) with the three flat washers
(5) and wood screws (6).
4. Install the two rubber caps (7).
(4)
5. Remove the bolts (3).
2054Q
HE-8000
4. INSTALLATION
11