Bar Tacking; Embroidery - Kenmore 385.18330 Owner's Manual

Bar Tacking
(_ Stitch selector: 5
(_) Stitch width: 2 to 65
(_) Stitch length: 0.5 to t
® Needle thread tension: 2 to 6
O Presser foot A: Zigzag foot
This is similar to a very short satin stitch and is used
to reinforce points of strain such as corners, pockets
and straps of lingerie.
Sew four (4) to six (6) stitches.
Embroidery
(_ Stitch selector: 5
(_) Stitch width: t to 6.5
(_ Stitch length: Any
® Needle thread tension: 2 to6
(_ Feed dogs: Dropped
*Presser foot: Remove
Drop the feed dogs and remove the foot holder. Adjust stitch
width as desired Draw a design onto the fabric with tailor's
chalk_ Stretch the fabric between embroidery hoops and place
under the needle.
Lower the Presser foot lifter to engage the needle thread
tension. Holding the needle thread in your left hand, rotate the
handwheel counterclockwise for one complete tumo
Pull the needle thread to draw the bobbin thread to the right
side of the fabric. At medium speed, stitch along the marked
outline, guiding the fabric carefully by hand. After embroidery
is completed, raise the feed dogs for normal sewing.
f
f-
@
®
| WIDTH
_ LENGTH
@
®
®
/' I
Lj
®
_WIDTH (_)
LENGTH (_)
@
J
52