Bar Tacking; Embroidery - Kenmore 385.17624 Owner's Manual

Hide thumbs Also See for 385.17624:
Table of Contents

Advertisement

Bar Tacking
O Stitch selector:
2
(_ Stitch width:
2 to 6.5
(_) Stitch length:
0.5 to 1
® Needle thread tension:
2 to 6
0
Presser foot A:
Zigzag foot
(9
®
_
WIDTH
(_)
LENGTH
@
®
%
This is similar to a very short satin stitch and is used to rein-
force points of strain such as comers, pockets and straps of
lingerie.
Sew four (4) to six (6) stitches.
Embroidery
(_) Stitch selector:
2
Stitch width:
1 to 6.5
(_ Stitch length:
Any
(_ Needle thread tension:
2 to 6
(_ Feed dogs:
Dropped
*Pressure foot:
Remove
Drop the feed dogs and remove the foot holder. Adjust stitch
width as desired. Draw a design onto the fabric with tailor's
chalk. Stretch the fabric between embroidery hoops and place
under the needle.
Lower the presser foot lifter to engage the needle thread
tension. Holding the needle thread in your left hand, rotate the
handwheel counterclockwise
for one complete turn.
Pull the needle thread to draw the bobbin thread to the right
side of the fabric. At medium speed, stitch along the marked
outline, guiding the fabric carefully by hand° After embroidery
is completed, raise the feed dogs for normal sewing.
f
_
WIDTH
(9
_
LENGTH
®
®
®
®
52

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents