Installing The Fishfinder Unit; Selecting A Fishfinder Installation Location; Mounting The Bracket Assembly - Garmin 90/140 Owner's Manual

I Y F
NSTALLING OUR ISHFINDER
Drill pilot holes here.
Level
Align with the
transom bottom. The
transducer should
extend 1/8" below
fiberglass hulls or
3/8" below aluminum
hulls.
Keep it parallel with the water line.
OK
10
> I F
NSTALLING THE ISHFINDER
U
NIT
Installing the Fishfinder Unit
Selecting a Fishfinder installation Location
Select a Fishfinder installation location that allows you to
view and operate it easily while operating the vessel. Select
a mounting surface strong enough to support the weight
of the Fishfinder and protect it from excessive vibration or
shock. DO NOT mount the bracket in a location where the
Fishfinder is exposed to extreme temperature conditions.
When installing the mounting bracket, be sure to allow
room to connect and rout the power cable.

Mounting the Bracket Assembly

Tool List (not included)—drill, screwdriver (Phillips or
standard), three #8 pan-head machine bolts with matching
nuts and washers, and a 5/32
self-tapping screws and a 1/16
drill bit; or three #8 pan-head,
"
drill bit.
"
Fishfinder 90/140 Owner's Manual