Marking A Waypoint - Garmin Fishfinder 340C Owner's Manual

u f 340c > M
sIng the IshfInder

Marking a Waypoint

You can use Pointer mode to move a cursor around on the paused
Sonar Page to reference sonar items and mark waypoints for
that location (if your Fishfinder is attached to a Garmin GPS or
compatible NMEA navigation device; see
use Pointer mode, a data field appears at the top of the graph with
the cursor's depth, surface temperature for that location, and GPS
coordinates (if available). This makes it easy to save the location of
an underwater object (such as a stump, rock, or brush pile), which
you can navigate back to with your GPS receiver.
To enable NMEA input/output:
1. Press and hold ADJ/MENU. The Main Menu appears.
2. Use the ROCKER to select the System tab.
3. Use the ROCKER to select the NMEA Input/Output field.
Press ENTER.
4. Use the ROCKER to select On. Press ENTER. On appears
in the field.
5. Press QUIT to return to the previous page.
40
W
ArkIng A AyPoInt
page 16). When you
To start or stop Pointer mode on a Sonar Page:
1. From a Sonar Page, hold PAUSE for two seconds. The
Fishfinder is now in Pointer mode.
2. Use the ROCKER to move the cursor around on the screen.
Information about the Pointer location appears on the
screen.
3. Press QUIT to resume normal scrolling.
Fishfinder 340C Owner's Manual