Beko Oven Manual page 13

Regulations
The cooker must be installed in accordance with
the Gas Safety (Installation and Use) Regulations
and the relevant Building Regulations in force.
Ireland Only:
• This appliance must be installed in
accordance with the Domestic installation of
gas (Irish Standard) in force Failure to install
the appliance correctly could invalidate the
warranty and lead to liability claims and
prosecution.
•
Your product is equipped for natural gas
(NG).
The cooker is designed for UK and Ireland
installation using a flexible connection with
tubing in accordance with the regulations in
force. Length of 900 mm is recommend
(Ireland 600 mm).
Make sure that the natural gas valve is readily
accessible.
If a flexible hose is used it must not come into
contact with the top 150mm/6 inches (hot region)
of the rear of the appliance. Do not pass the hose
through the (**) hot region behind the oven.
(**) Hot region
If you need to use your appliance later with
a different type of gas, you must consult an
authorised service centre for the related
conversion procedure.
Seal all connections with gas sealant.
1. Shut gas supply.
2. Connect safety (gas) hose 5 to the inlet valve
of the oven.
3. Connect gas hose with elbow joint 6 .
1 Gasket
2 Adapter (optional) with 1/2" outlet
3 Gasket
4 Gas (safety) hose
5 Valve with 90° outlet
6 Connection piece
7 Gas supply pipe
DANGER
The gas hose must not be clamped, bent
or trapped or come into contact with hot
parts of the product.
There is the risk of explosion due to
damaged gas hose.
• Push the product towards the kitchen wall.
• Hook safety chain.
• Adjusting the feet of oven
Vibrations during use may cause cooking
vessels to move. This dangerous situation can
be avoided if the product is level and
balanced.
For your own safety please ensure the
product is level by adjusting the four feet at
14 / EN