Beko Oven Manual page 10

Table of Contents

Advertisement

The appliance corresponds to device class 1,
i.e. it may be placed with the rear and one
11/EN
side to kitchen walls, kitchen furniture or
equipment of any size. The kitchen furniture
or equipment on the other side may only be
of the same size or smaller.
Any kitchen furniture next to the appliance
must be heat-resistant (100 °C min.).
The appliance must be secured against
overbalancing by using the supplied two
safety chains on your oven. Fasten hook (1)
to the kitchen wall (5) and connect safety
chain (2) to the hook.
1
Hook (is not supplied)
2
Safety chain (supplied and mounted to oven)
3
Rear of cooker
4
Firmly fix chain to cooker rear
5
Kitchen wall
Room ventilation
All rooms require an openable window, or
equvalent, and some rooms will require a
permanent vent as well.
The air for combustion is taken from the room air
and the exhaust gases are emitted directly into the
room.
Good room ventilation is essential for safe
operation of your appliance. If there is no window
or door available for room ventilation, an extra
ventilation must be installed.
The appliance may be located in a kitchen,
kitchen/diner or a bed-sitting room, but not in a
room containing a bath or shower. The appliance
must not be installed in a bed-sitting room of less
3
than 20m
.
Do not install this appliance in a room below
ground level unless it is open to ground level on at
least one side.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents