Table of Contents
Advertisement
Voice Mail
To disable monitoring:
Dial [3]. The telephone returns to an idle condition.
Conditions
You may press [MUTE] while monitoring a call to be
connected to the caller.
When you answer a call the programmed Disconnect Digits
Table digits are sent to the voice mail port.
Youwillhearthealerttoneregardlessofwhetheryourtelephone
is idle or busy or in speakerphone or handset mode.
When the new timer VM MON TIME expires the opportunity
to invoke the feature has past.
The new timer VM MON TIME is added to the Call Handling
category of programming and will allow (10/20/30/40/60)
second duration to be programmed.
When you use the VM Monitor feature, a conference is
established between yourself, the voice mail port associated
to the call, and the caller leaving the voice mail message.
If youareon a call when theVMMonitor alerttonesignals you,
youmay placethecallon holdtoenabletheVMMonitorfeature.
You may exit the VM Monitor mode by hanging up the
handset, pressing [SPKR], or pressing [CLEAR].
You may monitor only one call at a time.
The feature code may be programmed on a programmable
feature button. The green lamp will flash fast to indicate that
the Voice Mail Monitor feature is ready.
91
Advertisement
Table of Contents
