STARPLUS DHS-L User Manual page 69

Last Number Redial (LNR)
Operation
You may either choose a specific CO line for use with LNR by first
pressing that CO line button or you may allow the line to be
selected automatically by the LNR feature.
1. Press a line button.
2. Press [FEAT ].
3. Dial [8]. The previously dialed number is dialed on the CO
line selected.
In the event that all CO lines are busy, you will hear busy tone
and if you have an Executive Telephone, it will display:
If the Last Number Redial memory is empty, you will hear
error tone and an Executive Telephone will display:
Conditions
Last Number Redial cannot be applied to intercom calls.
When you activate LNR, the system will first select the
previously used CO line to dial. If that CO line is busy, any idle
CO line in the same CO line group will be selected. If all CO
lines are busy, you will hear busy tone and an Executive
Telephone will display ALL CO LINES BUSY.
ALL CO LIN E S B U SY
LN R EMP T Y
The LNR feature code may be programmed on a
programmable feature button.
61