STARPLUS DHS-L User Manual page 91

Transfer
Operation
To perform an Unscreened CO line or intercom call transfer:
1. Press [HOLD].
2. Dial the station/Hunt Group number where you want to
transfer the call.
3. Press [ TRANS] to transfer the call unscreened.
To perform a Screened CO line or intercom call transfer:
1. Press [HOLD].
2. Dial the station/Hunt Group number where you want to
transfer the call.
3. Wait for the person you called to answer.
4. Press [ TRANS] to complete the call transfer.
To use One-Button Transfer:
While on a call, press the pre-programmed [DSS] button.
To transfer call to a Voice Mail Mailbox:
1. Press [HOLD].
2. Dial the voice mail Hunt group number (e.g., 430).
3. Dial the 3-digit station number of the target mailbox.
4. Press [ TRANS] to complete the call transfer.
Conditions
Ring transfer recall time for any CO line call is programmable,
between 16, 30, 60, 90, and 120 seconds.
When a transferred CO linerecalls,thelinenumber and station
number where the call was transferred will be displayed.
Once the outside line changes from Hold to Transfer status,
the outside party will hear Music-on-Hold change to a
system-provided Ring Back tone.
Auto Transfer MUST first be enabled to use the One-Button
Transfer method.Press[FEAT]+[5]+[4]toenableAutoTransfer.
Do not press the [CLEAR] button when processing an
incoming call. This will disconnect the call . The telephone will
return to the i dle condition followi ng the transfer. operation.
83