General Conventions; Dhs-L Features - STARPLUS DHS-L User Manual

General Conventions

General Conventions
DHS-L Features
System Access -- System resources are accessed using directory
numbers to dial access the resource (station numbering, UCD
Group numbering, etc.).
The [FEAT ] button joined with dial key codes will appear
throughout the text. This button is used to access most
system features.
Press the [CLEAR] button to cancel the current operation.
One-Button Access -- Any feature or resource code may be
stored for one-button access under an available Programmable
Feature Button.
LCD Prompts -- Operation steps are oriented for the Executive
Key Telephone since the interactive LCD prompts encompass all
Executive Key Telephone functions.
Soft Button Display -- Three LCD interactive Soft Buttons are
positioned beneath the display on the ExecutiveKey Telephone.
These buttons are used during feature operation for
interactive display prompt menus.
For orientation purposes,the Soft Buttons may be referred to
as the left, center and right Soft Buttons.
Programming Mode --System programming can be executed at
any idle Executive Key Telephone. Only one station may enter the
system programming mode at any time.
Valid programming is confirmed with a single beep tone
from the speaker.
Invalid programming is alerted with a double beep tone.
5