Setting Up The Wireless; System - Sony HT-CT660 Operating Instructions Manual

Prepare screws (not supplied)
that are suitable for the holes on
the back of the Sound Bar.
.............. 4ram
(3/16 inches)
More than 25 mm (1 inch)
4
Hang the Sound Bar onto the
screws.
Align tile holes on the back of the
Sound Bar to the screws, then
hang the Sound Bar onto the
2 screws
2
Hole on the back of the Sound Bar
Fasten the screws to the wall,
The screws should protrude 6 to
7 mm (approx. 1/4 inches).
680 mm
(26 3/4 inches)
Remove the center stand.
Setting up the Wireless
System
The Sound Bar transmits sound from
the equipment to the subwoofer by
wireless communication
2
Connect the AC power cord
(mains lead) of the Sound Barto
a wall outlet (mains).
Connect the AC power cord
(mains lead) of the subwoofer
to a wall outlet (mains).
the I/O indicator of tile
subwoofer lights up in red.
If it does not light up, press the
I/O button of the subwoofer and
wait for the indicator to light up in
red
Press the I/_) button of the
Sound Bar.
When tile wireless connection is
made, the I/_ indicator of the
subwoofer turns green. If it does
not turn green, perform the
operations of "Linking the system
(LINK)" (page 30)
18us