Positioning The System - Sony HT-CT660 Operating Instructions Manual

Hide thumbs Also See for HT-CT660:
Table of Contents

Advertisement

Available languages

Available languages

Positioning the system
The illustrations
below are examples of how to install tile Sound Bar
• Installing the Sound Bar on a rack
(page 17)
• Installing the Sound Bar on a wall
(page 17)
• Take following precautions when installing the Sound Bar and the subwoofer,
- Do not block the ventilation
holes on the rear panel.
- Do not place the Sound Bar and the subwoofer in a metal cabinet.
- Do not place an object such as an aquarium between the Sound Bar and the
subwoofer.
- Place the subwoofer close to the Sound Bar in a same room.
• When the Sound Bar is placed in front ofa TV, the TV may not be controlled with the
remote control of the TV. In that case, place the Sound Bar away from the TV. If the
remote control of the TV still cannot control the TV, set "IR REP" of the AMP menu to
"ON" (page 29).
• Make sure that the remote control of the TV cannot control the TV, then set "IR REP"
to "ON'. If it is set to "ON" when the remote control can control the TV, appropriate
operation may not be obtained, because of the interference between the direct
command from the remote control and the command via the Sound Bar.
16us

Advertisement

Table of Contents
loading

Table of Contents