To install
the Sound
Bar facing
front
1
Attach
a side stand
(for front-
facing
installation)
to each
side.
2
Attach a side stand (for upward-
tilting installation)
to each side.
You can install the Sound Bar on the
wall.
To install the Sound Bar tilting
upward
1
Remove
the center
stand.
stand
• Use screws that are suitable for the wall
material and strength. As a plaster
board wall is especially fragile, attach
the screws securely to a wall beam.
Install the Sound Bar on a vertical and
flat reinforced area of the wall.
• Be sure to subcontract the installation
to Sony dealers or licensed contractors
and pay special attention to safety
during the installation.
• Sony is not responsible for accidents or
damage caused by improper
installation, insufficient wall strength,
improper screw installation or natural
calamity, etc.
continued
17us