Bluetooth; Using The Bluetooth Function - Sony HT-CT660 Operating Instructions Manual

Using the BLUET00TH
function
If the system is not paired with any
equipment, you must pair the system
with the equipment to be connected
Select "BT AU" with the INPUr button
on the remote control to enter pairing
mode
1
Place the system and a
BLUETOOTH device within
1 meter (3.3 feet).
2
Press INPUT to select "BT AU."
3
Set the BLUETOOTH device in
pairing mode.
For details on setting tile
BLUETOOTH device in pairing
mode, refer to the operating
instructions supplied with the
device.
4
When the detected devices are
listed on the BLUETOOTH
device, check that "HT-CT660" is
listed.
On some BLUETOOFH devices, tile
list may not be displayed
5 Select "HT-CT660" on the list.
If entering a Passkey is requested,
enter "0000 "
O Make the BLUETOOTH
connection on the BLUETOOTH
device.
When tile t3LUt_ilTOOTT--t connection
is made correctly, the illumination
LED lights up in blue and the
pairing information is stored in the
system.
About the LED for BLUETOOTH
lhe illumination LED lights up or
flashes in blue to indicate the
BLUETOOTH status
System status LED status
DulingBLUETOOTH Flashes quicklyin
pairing blue.
The system is Flashes in blue.
attempting to
connect with a
BLUETOOTH device
The system has Lights up in blue.
established in
connection with a
BLUETOOTH device
The system is in Flashes slowly in
BLUETOOTH blue.
standby mode
when the system is
off
• For details on operation of the
connected devices, refer to the
operating instructions supplied with the
devices.
• The BLUETOOTH devices to be
connected must support A2DP
(Advanced Audio Distribution Profile).
• Use a BLUETOOTHdevice such as
BLUETOOTH mobile phone in an easily
visible place in the same room where
the Sound Bar is placed.
• If Wi-Fi equipment is used, BLUETOOTH
communication may become unstable.
In that case, use the BLUETOOTHdevice
as close as possible to the Sound Bar.
• Sound may be interrupted because of a
problem with the BLUETOOTHdevice.
22us