Step 4: Setting Up The Wireless System - Sony BDV-E780W Operating Instructions Manual

filename[E:\BDV2011\Models\E2WF-
E8WF_UC\4261379111\4261379111BDV780WUC\gb04gst.fm]
gb_book.book Page 28 Thursday, November 25, 2010 6:04 PM
Step 4: Setting up the
Wireless System
The unit transmits sound to the surround
amplifier that is connected to the surround
speakers. To activate wireless transmission,
perform the following Steps.
1
2
3
28
Insert the wireless transceiver into the
unit.
Rear panel of the unit
0
-R T 5
E Z W
Wireless transceiver
Insert the wireless transceiver into the
surround amplifier.
Rear panel of the surround amplifier
5 0
R T
W -
E Z
Wireless transceiver
Connect the AC power cord (mains
lead) of the unit.
Before connecting the AC power cord,
make sure all connections in "Step 2:
Connecting the System" (page 20) are
secure.
US
4
Press "/1 to turn the system on.
"/1
5
Connect the AC power cord (mains
lead) of the surround amplifier.
LINK/STANDBY indicator
LINK/STANDBY
When wireless transmission is activated,
the LINK/STANDBY indicator turns
green.
If the LINK/STANDBY indicator does not
turn on, see "Surround amplifier" (page 13)
and "Wireless sound" (page 71).
About the standby mode
The surround amplifier enters standby mode
automatically (the LINK/STANDBY indicator
turns red) when the main unit is in standby mode
or wireless transmission is deactivated.
The surround amplifier turns on automatically
(the LINK/STANDBY indicator turns green)
when the main unit is turned on and wireless
transmission is activated.
To specify the wireless
connection
If you use multiple wireless products, you can
specify the wireless connection to link the main
unit to the surround amplifier (Secure Link
function). For details, see "Further Settings for
the Wireless System" (page 54).
model name [BDV-E780W/BDV-E980W]
[4-261-379-11(1)]
masterpage:Left
specdef v20080116