Sony HT-CT60BT Owner's Manual
Home theatre system
Hide thumbs
Also See for HT-CT60BT:
- Operating instructions manual (88 pages) ,
- Service manual (2 pages)
Related Manuals for Sony HT-CT60BT
Summary of Contents for Sony HT-CT60BT
- Page 1 4-475-782-21(2) Home Theatre Getting Started System BLUETOOTH Function Playback Options Additional Information HT-CT60BT...
- Page 2 This product has been manufactured by or on behalf of Sony Corporation, 1-7-1 To reduce the risk of fire, do not cover Konan Minato-ku Tokyo, 108-0075 the ventilation opening of the appliance Japan.
- Page 3 recycling of electrical and electronic should be replaced by qualified service equipment. By ensuring this product is staff only. disposed of correctly, you will help To ensure that the battery will be prevent potential negative treated properly, hand over the product consequences for the environment and at end-of-life to the applicable human health, which could otherwise...
-
Page 4: Precautions
On placement Precautions Place the system in a location with adequate ventilation to prevent heat buildup and prolong the life of the On safety system. Should any solid object or liquid fall Do not place the system near heat into the system, unplug the system sources, or in a place subject to direct and have it checked by qualified... -
Page 5: Bluetooth Wireless Technology
BLUETOOTH Bluetooth SIG, Inc. and any use of such device. marks by Sony Corporation is under The audio playback on this system may license. be delayed from that on the... - Page 6 Effects of other devices Sony cannot be held liable in any way for damages or other loss resulting BLUETOOTH devices and wireless LAN from information leaks during (IEEE 802.11b/g) use the same communication using BLUETOOTH frequency band (2.4 GHz). When using technology.
-
Page 7: Table Of Contents
Table of contents Precautions ......4 BLUETOOTH wireless technology ......5 Getting Started Unpacking .......8 Index to parts and controls ..9 Connecting the TV and player, etc........11 Positioning the system ..13 Connecting the AC power cord (mains lead) ..... 15 Setting up the sound output of the connected equipment ....... -
Page 8: Getting Started
Getting Started Unpacking Subwoofer (1) Sound Bar (1) Digital optical cord for a TV (1) AC power cord (mains lead) (1) Remote control (RM-ANU191) (1) Operating Instructions (1) Warranty (1) ... -
Page 9: Index To Parts And Controls
Index to parts and controls For more information, see the pages indicated in parentheses. Sound Bar SURROUND indicator (page 20) Input indicators (page 20) OPTICAL COAXIAL ANALOG BLUETOOTH indicator (page 16) continued... - Page 10 This section describes subwoofer and Sound Bar button operation. See page 20 for details on the button SURROUND operation of connected equipment. TV (Sony TV only) Note Note Point the remote control toward the ...
-
Page 11: Connecting The Tv And Player, Etc
Connecting the TV and player, etc. Insert the plug of the AC power cord (mains lead) fully to the end. Connecting the TV, player, and other equipment HDMI output HDMI cable (not supplied) “PlayStation 3,” Blu-ray ® Disc™ player, DVD player, satellite tuner, cable television tuner, etc. - Page 12 If the TV is not equipped an optical digital audio output jack, see “Connecting a TV not equipped an optical digital audio output jack”. When connecting the digital optical cord (supplied) to the OPTICAL jack on the Sound Bar, remove the protective cap from the OPTICAL jack. Connecting a TV not equipped an optical digital audio output jack If your TV is equipped a headphone jack that is compatible with an audio out...
-
Page 13: Positioning The System
Positioning the system The illustrations below are examples of how to install the Sound Bar. Note • When you select a place for the Sound Bar, do not block the heat ventilation on the rear panel of the Sound Bar. Installing the Sound Bar ... -
Page 14: Installing The Sound Bar On A Wall
Be sure to subcontract the installation to Sony dealers or licensed contractors and pay special attention to safety during the installation. Sony is not responsible for accidents or damage caused by improper installation, insufficient wall strength,... -
Page 15: Connecting The Ac Power Cord (Mains Lead)
Hang the Sound Bar onto the Connecting the AC screws. Align the holes on the back of the power cord (mains lead) Sound Bar to the screws, then hang the Sound Bar onto the two screws. Before connecting the AC power cord (mains lead) of the Sound Bar to a wall outlet (mains), connect all the other equipment and TV to the... -
Page 16: Bluetooth Function
Use a BLUETOOTH device such as listed on the BLUETOOTH BLUETOOTH mobile phone in an easily device, check that “SONY:HT- visible place in the same room where CT60BT” is listed. the Sound Bar is placed. On some BLUETOOTH devices, ... -
Page 17: Control
again. However, you must repeat enters pairing mode when pairing in the cases listed below. “BLUETOOTH” is selected as input. In this case, pairing mode is not released – Pairing information is deleted by automatically. repairing the system. – Pairing for 9 or more devices is to be set. -
Page 18: Listening To Music With Bluetooth Connection
– If the smartphone is in a case, remove it from the case. Depending on your smartphone, you may not need to download “NFC Easy Connect” to connect the system with your smartphone by one touch. In that case, the operation and specifications may be different from the description Turn on the system. - Page 19 them off. If these functions are on, sound may be distorted. In the following cases, you will have to make the BLUETOOTH connection again. – The power of the system is not on. – The power of the BLUETOOTH device is not on, or the BLUETOOTH function is off.
-
Page 20: Remote Control (Rm-Anu191)
The sound may be output from the Playback Options TV’s speaker. In this case, turn the volume of the TV’s speaker down to Operating the system minimum. using the supplied Enjoying the surround remote control effect This system can create multichannel ... -
Page 21: Controlling A Connected Tv
Press and hold SURROUND until the OPTICAL indicator on the Sound Bar flashes twice. If you use a Sony TV only without using this system, you can control the Sony TV connected to the system, using the buttons with yellow printing on the remote control. -
Page 22: Changing The Battery
Notes Changing the battery If you do not use the remote for a long period of time, remove the battery to avoid possible damage from battery The working distance of the remote leakage and corrosion. shortens as the battery becomes ... -
Page 23: Additional Information
Should any and the TV (page 11, 12). problem persist, consult your nearest Check the sound output of the TV Sony dealer. (page 15). Check if the TV sound is set to low POWER volume or muted (page 21). - Page 24 The sound is not in sync with the Sony dealer. image. When you are watching movies, you may hear the sound with a slight delay from the image.
-
Page 25: Specifications
Transmission range (A2DP) 20 Hz - 20,000 Hz (Sampling Specifications frequency 44.1 kHz) The actual range will vary depending Formats supported by this system on factors such as obstacles between Digital input formats supported by devices, magnetic fields around a this system are as follows. - Page 26 Dimensions (approx.) 170 mm × 245 mm × 300 mm (w/h/ Mass (approx.) 2.7 kg Design and specifications are subject to change without notice.
-
Page 27: Index
Index Symbols 10 10 BLUETOOTH 5, 16 Connecting TV 11 Digital optical cord 11 DVD player 11 Installing 13 Positioning the system 13 Remote control operating 10 Reset 24... - Page 28 4-475-782-21(2) ©2013 Sony Corporation Printed in China...