Applying Ribbon With A Twin Needle - Singer CG-500 Commercial Grade Workbook

Applying Ribbon with a Twin Needle

By using a Twin Needle, two parallel rows of stitches can be used to
attach a ribbon while stitching.
Machine Set-Up:
Stitch:
Pattern Selector:
Stitch Width:
Stitch Length:
Presser Foot:
Needle:
Needle Position:
Materials:
5" x 5" piece of lightweight woven fabric, with a stabilizer ironed on
6" long piece of " wide satin ribbon
¼
Procedure:
Insert the second spool pin.
Both spools of thread follow the same threading path until they reach
the eye of the needle. Thread each needle separately.
Insert the ribbon through the openings in the presser foot. Pull the
ribbon under the foot and then to the back of the foot.
Slowly sew a row of stitching on the right side of the fabric.
Maintain a slow consistent speed to ensure accurate stitching.
*Twin Needle is an optional accessory. Check with your SINGER® Retailer.
Straight Stitch
A
1, no width
5
Transparent Satin Foot or Standard Foot
Twin Needle
Center
32