Siemens OpenScape Voice OpenStage 20 E SIP User Manual page 125

Step by step
Ringer melody = 4
Option = Save & Exit
User
Audio
Settings?
Ringer tone sequence = 2
Option = Save & Exit
User
f
Required pattern melody
(e. g. 4). You will immediately hear the corresponding
Ringer melody. Confirm the selected Ringer melody.
l
Select the option shown and confirm twice.
Pattern sequence
z You can also configure this setting via the WEB inter-
face
Prerequisite: You have choosen the "pattern" ringtone,
see page 124.
N
Press the key shown.
Select and confirm the option shown.
j
if nec.
Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
f
Select your desired Ringer tone sequence between 1
and 3 (e. g. 2) You immediately hear the set Ringer mel-
ody with the chosen Ringer tone sequence. Confirm
the selected setting.
l
Select the option shown and confirm twice.
Room character
Speakerphone mode is only available in
OpenStage 20/20 G.
To ensure that the other party can hear you properly in
speakerphone mode (only with OpenStage 20/20 G)
you can adjust the phone to the room acoustics by
choosing one of the following room characters: "Nor-
mal", "Echoing", "Muffled" .
z You can also configure this setting via the WEB inter-
face
N
Press the key shown.
Select and confirm the option shown.
1. The phone displays the current setting.
1
Choose between 1 and 8
page 145.
page 145.
Individual phone configuration
125