Step 9 Install Seat Assembly - Schwinn Fitness 231 Assembly Manual

Step 9 Install Seat Assembly

Parts:
• Seat Assembly (From step 3-6)
• Seat Rail (Ref. H)
• Seat Rail Bracket (Ref. D-22)
Tools:
• Supplied Allen Wrench
9-1 Pull out on the Seat Adjustment Knob (K-3) while sliding the
Seat Assembly onto the Seat Rail (H). Release the Adjustment
Knob to lock the Seat Assembly in place.
NOTE: Make sure the seat Adjustment Knob is on the side of the
Seat Rail that has the holes.
9-2 Reinstall the Seat Rail Bracket.
9-3 Reconnect the Heart Rate Wires and Reinstall the Seat Rail with
Seat Assembly on the main unit.
NOTE: After reconnecting the Heart Rate Wires, tuck them into
the hole in the frame to avoid pinching the wires.
9-4 Connect the Heart Rate Wire (M) to the jack on the junction box
labeled "HAND PULSE". (Figure B)
D-22
H
Figure B
K-3
Figure A
M
15