Step 8 Install Seat Assembly - Schwinn 226 Recumbent Bike Assembly Manual

Step 8 Install Seat Assembly

Parts:
• Seat Assembly (From step 3-6)
• Seat Rail (Ref. H)
• Seat Rail Bracket (Ref. D-22)
Tools:
• Supplied Allen Wrench
8-1 Pull out on the Seat Adjustment Knob (K-3) while sliding the
Seat Assembly onto the Seat Rail (H). Release the Adjustment
Knob to lock the Seat Assembly in place.
Note: Make sure the seat Adjustment Knob is on the side of the
Seat Rail that has the holes.
8-2 Reinstall the Seat Rail Bracket.
8-3 Reconnect the Heart Rate Wires and Reinstall the Seat Rail with
Seat Assembly on the main unit.
8-4 Connect the Heart Rate Wire (M) to the Back of the
Seat Assembly.
(Figure B)
D-22
14
H
Figure B
K-3
Figure A
M