Operating; Before First Use; Conditioning The Water Filter; Machine Preparation - Breville Infuser BES840XL Instruction Booklet

OPERATING

BEFORE FIRST USE

Machine Preparation

Remove and discard all labeling and
packaging materials attached to your
espresso machine. Ensure you have removed
all parts and accessories before discarding
the packaging.
Remove the water tank located at the back of
the machine by lifting the water tank handle.
Remove the plastic bag containing the water
filter and water filter holder. Clean parts and
accessories (water tank, portafilter, filter
baskets, frothing jug) using warm water
and a gentle dish washing liquid, then rinse
and dry thoroughly. Wipe the outer housing
and drip tray with a soft damp cloth and
dry thoroughly. Do not immerse the outer
housing, power cord or power plug in water
or any other liquid.
NOTE
Do not use abrasive cleansers, pads or
cloths which can scratch the surface.
Do not clean any of the parts or
accessories in the dishwasher.
1 2
Soak water filter for 5 mins Rinse water filter & mesh

CONDITIONING THE WATER FILTER

•
•
•
•
•
•
•
3 4
REPLACEMENT DUE
Place filter into filter holder Set date 2 months ahead
Remove the water filter and water filter
holder from the plastic bag.
Soak the water filter in a cup of water
for 5 minutes, then rinse under cold
running water.
Wash the water filter holder with cold
water, taking specific care to rinse the
stainless steel mesh.
Insert the water filter into the two parts
of the water filter holder.
Set Date Dial 2 months ahead.
To install the assembled water filter
holder into the water tank, align the base
of the water filter holder with the adapter
inside the water tank. Push down to lock
into place.
Slide the water tank back into position
at the back of the machine, ensuring to
push down completely to lock into place.
NOTE
To purchase water filters contact
Breville Consumer Service on
1-866-273-8455 (USA) or
1-855-683-3535 (Canada).
5 6
Install filter in water tank Insert & lock water tank
11