The Channels Of The Warp T; Connections And Control Features - Hughes & Kettner Warp-T Manual

WARP T - MANUAL

1.0 THE CHANNELS OF THE WARP T™

The WARP T™ is equipped with two channels that will
serve you well if you like your music hard & heavy:
1.1 WARP CHANNEL
Dive right into the wonderful world of high gain
distortion and luxuriate in the jaw-droppingly
powerful sound of every riff that rips through
speakers. Courtesy of the tube circuitry, this sound
leaps right out of the cabinet and goes straight for
the throat. The WARP channel delivers it all, from a
nasty nu metal thump to post-grunge growl, from
alternative snarl to the doomsday thunder so
cherished by devotees of death and Goth metal.
By varying the WARP channel's preamp gain and
the power amp via the MASTER VOLUME knob,
you can dial in anything from venomous to spine-
chilling scream – and all points in between.

2.0 CONNECTIONS AND CONTROL FEATURES

So far, so good! Now you know what your new
metal machine can do for you and your music.
But you need to learn all about the connections
2.1 FRONT PANEL
The cockpit of the WARP T™ is divided to three
sections. On the left next to the MAINS button,
you'll find the MASTER section.
6 6
1.2 CLEAN CHANNEL
Even the hardest rocking axe slingers will want to
give their head-banging audiences a break now
and then. That's what the CLEAN channel is here
for – to deliver sweet clean sound for those softer
passages that make the next monstrous riff seem
even more elephantine. The WARP T™ offers a
unique brand of ultra clean sound that remains
crisp, clear and sparkly at even very high volumes.
This ensures your sound cuts through and ends up
where it belongs – in your audience's ears.
and control features of the WARP T™ to be able
to make the most of its full sonic glory. Let's take
a closer look:
WARP
To the right you see the WARP section and finally
the CLEAN section. Control features are arrayed
from left to right as follows:
CLEAN