Motorola 110502USM001 - Vanguard 60 Router User Manual page 78

Configure LAN Connections
3-28
Number of Session to be Compressed
Default 255
Range 1 to 1024
Description Specifies the number of session to be compressed. Changes to this
parameter causes the context list to be refreshed.
Each compression session that exists between the compressor and
decompressor is uniquely identified by a session context identifier
(CID). The CID can be 8 or 16 bit. When the configured value
exceeds 255, a 16 bit CID.
Full Header Refresh Counter
Default 0
Range 0 to 1000
Description A setting of 0 indicates that there is no periodic transfer. A setting
of 1 to 1000 indicates the number of compressed packet
transmitted before a FULL HEADER packet is retransmitted.
Note
There are four additional RTP/UDP/IP Header Compression DEBUG
parameters. Unless you are a thoroughly experienced network professional,
operating in the DEBUG Mode is not recommended. Please contact your
Motorola Service Representative for additional information.
Configuring a Vanguard Router