Motorola 110502USM001 - Vanguard 60 Router User Manual page 75

Configuring a Vanguard Router
T0100-01, Revision B
Protocol Priority Profiles
Range 1 to 100
Default 1
Description You can specify up to three protocol priority profiles. Enter the
profiles separated by a comma (,) as shown:
1, 2
or
1 , 2 , 3
These profiles correspond to the entry numbers of the Protocol
Priority Profile table configured under Configure Network
Services. The order in which the profiles are specified indicates
the order of priority among the profiles. These profiles are used for
classifying and servicing the traffic flows depending on the class
and bandwidth assignments configured.
Credit Cycle
Range 1 to 200
Default 4
Description Specifies the granularity of traffic forwarding in KBytes. This is
the block of byte transfer within which each class has its share
depending on its assigned percentage and is used for the
bandwidth allocation for each traffic class as configured in the
Protocol Priority Profile Table.
(For example, If port speed or CIR equals 64000 Kbits, credit
cycle equals:
64,000/8
2
Configure LAN Connections
Release 5.4
3-25