Furuno GP-1650DF Operator's Manual page 86

6. Press the soft key GO TO. Soft key titles
change as in Figure 12-10. If GO TO key
is not displayed, press the cursor pad.
40˚45.971'N
+
13˚57.462'E
PUNTA CORNACCHIA
ACCO AMENO
ISCHIA PORTO
CASAMICCIOLA
I. ISCHIA
DGPS 3D
Figure 12-13 Plotter display
7. Press the soft key NEAR SRVICE.
The SELECT PORT SERVICE window
appears.
SELECT PORT SERVICE
Health emergency
Figure 12-14 SELECT PORT SERVICE
window
8. Use the cursor pad to select service mark
desired. Currently selected icon is
circumscribed. The name of currently
selected icon appears at the top of the
window. Refer to the user's manual of C-
MAP NT for details about the icons.
9. Press the soft key ENTER or the
[ENTER] key. Then, the display shows
the locations of those services nearest
you.
12-4
GO TO
FROM 0.26 nm
OS 180.2˚
QUICK
ROUTE
NEAR
SRVICE
CANCEL
GO TO
Currently selected icon
40˚45.971'N
+
13˚57.462'E
PUNTA CORNACCHIA
ACCO AMENO
ISCHIA PORTO
CASAMICCIOLA
I. ISCHIA
SELECT ICON BY
DGPS 3D
KEY.
Figure 12-15 Sample filling station locations
10. Press ! or " to place the "hand cursor"
on the port service icon desired and press
the soft key ENTER or the [ENTER] key.
4045.971N
1357.462E
PUNTA CORNACCHIA
ACCO AMENO
ISCHIA PORTO
CASAMICCIOLA
I. ISCHIA
USE SOFT KEYS TO MAKE
DGPS 3D
ROUTE THEN PRESS ENTER
Figure 12-16 Make route window
11. Do one of the following:
Go directly to port service selected:
Press the [ENTER] key. The own ship and
the port service is connected by a blue line.
The range and bearing form own ship to the
port service appears at the navigation data
display.
You can go to the port service directly by
steerings the ship to the hearing indicated.
Go to port service selected via
waypoints, make a route as follows:
a) Move the cursor to the nearest waypoint
of the port service.
b) Press the soft key ADD QP.
c) Repeat the above steps a) and b) to
enter other waypoints.
GO TO
FROM 0.26 nm
OS 180.2˚
ENTER
CANCEL
GO TO
GO TO
FROM 0.26 nm
P01 180.2
OOM
OOM
OUT
ADD
ERASE
LST P
CANCEL
GO TO
IN
P