Furuno GP-1650DF Operator's Manual page 98

1
SOUNDER SETUP OPTIONS
Soft key SYSTEM SETUP
Soft key RANGE SETUP
CONFIGURATION
NOISE LIMITER (OFF, NL1, NL2, NL3)
CLUTTER (AUTO, 0-9)
WHITE MARKER [0-16 (or 0-8), Default: 0]
HUE (1-9, Default: 1)
SIGNAL LEVEL [SL1, SL2, SL3, SL4, SL5, SL6 (or SL1, SL2, SL3), Default: OFF]
PICTURE ADVANCE (2/1, 1/1, 1/2, 1/4, 1/8, STOP)
E/S WINDOW (STD, WIDE)
FISH ALM LVL (HIGH, NORMAL, LOW)
TX POWER (ON, OFF)
TVG 200 kHz (0-9, Default: 5)
TVG 50 kHz (0-9, Default: 5)
ECHO OFFSET 200 kHz (-20 - +20, Default: 0)
ECHO OFFSET 50 kHz (-20 - +20, Default: 0)
SEABED LVL 200 kHz (20-200, Default: 80)
SEABED LVL 50 kHz (20-200, Default: 80)
RANGE1 (Default: 15 ft)
RANGE2 (Default: 30 ft)
RANGE3 (Default: 60 ft)
RANGE4 (Default: 120 ft)
RANGE5 (Default: 200 ft)
RANGE6 (Default: 400 ft)
RANGE7 (Default: 1000 ft)
RANGE8 (Default: 2500 ft)
ZOOM RANGE (7-2500 ft, Default: 30 ft)
B/L RANGE (10, 20 ft)
SETUP NMEA PORT 1
SETUP NMEA/DGPS PORT 2
SELECT SNTNC. soft key
UPLOAD/DOWNLOAD DATA
SELF TEST (MEMORY, I/O; KEYBOARD; TEST PATTERN)
SYSTEM MENU
DEMONSTRATION MODE
MEMORY/TRIP CLEAR
A-2
: When 8 is selected in HUE window
Setting range: 7-2500 ft
FORMAT
(NMEA0183Ver.1.5, 2.0)
LAT/LON FORMAT
(DD MM.MM', DD MM.MMM', DD MM.MMMM)
FORMAT
(NMEA0183Ver.1.5, 2.0, RTCM104EX, RTCM104INTRN,
RTCM104OUT)
LAT/LON FORMAT
(DD MM.MM', DD MM.MMM', DD MM.MMMM)
(AAM, APB, BOD, BWC/BWR, DBT/DPT, GGA,
GLL, MTW, RMA, RMB, RMC, VTG, WPL, XTE,
ZDA)
DOWNLOAD WAYPOINT/RTE TO PC
UPLOAD WAYPOINT/RTE FROM PC
SAVE DATA TO MEMORY CARD
LOAD DATA FROM MEMORY CARD
CLEAR PLOTTER MEMORY (NO, YES)
CLEAR GPS MEMORY (NO, YES)
CLEAR ALL MEMORY (NO, YES)
TRIP METER RESET (NO, YES)