Cisco CallManager Release 3.0(10 Specification page 92

Documentation Updates
Table 11 CMI Service Parameters Not Included in Release 3.0 Documentation (continued)
ParamName
InputDnSignificantDigits
KeepAliveDn
OutputDnFormat
OutputExternalFormat
Release Notes for Cisco CallManager Release 3.0(10)
92
Description
This parameter is designed to accommodate the differences between
voice mail mailbox numbers and DNs. If a Legacy voice mail system
has mailbox numbers that are longer than the DNs on the system, this
parameter can be used to strip the most significant digits. The
numeric value of this parameter indicates how many digits should be
used.
Note
Recommended default value: 10
For most voice mail systems, a value of F is acceptable for a string
parameter. However, some Octel systems periodically send an
invalid DN specifically for the purpose of verifying that the attached
Cisco CallManager is functioning properly. In this case, you can turn
off ValidateDns if you know the DN that the Octel system will use
as a keepalive. By programming that DN into the KeepAliveDn
parameter, you will ensure that the invalid DN message is returned
to the voice mail system when needed.
Use this parameter to format the DNs sent to the voice mail system.
Most numbers passed to the voice mail system are formatted using
this parameter.
Default value: %010s
Use this parameter is to format the DNs sent to the voice mail
system. Calling party DNs that are seven digits or longer are
formatted using this parameter.
Default value: %010s
No provision exists for stripping
digits other than leading ones.
78-13493-02