Cisco CallManager Release 3.0(10 Specification page 53

Table 6 Cisco CallManager Release 3.0(6) Resolved Caveats (continued)
DDTS Number Summary
CSCds53378 Cisco CallManager upgrade with
locations prevents SW-based
conference from working.
CSCds57574 Cisco WebAttendant will not install on
a Windows 98 client machine.
CSCds61655 GetCallInfo returns wrong info on call
fwded to route point.
CSCds61871 No error message occurs on
unauthorized CTI user via TSP.
78-13493-02
Explanation
The code for unlimited bandwidth in
location for Cisco CallManager 3.0 does
not currently work. Migration has been
changed to remove the 0 bandwidth location
records and set any devices location using it
to NULL. This will, in effect, give that
situation no bandwidth limitation.
Windows operating systems version of
regsvr32.exe could not load the .dll
extensions containing the
Cisco WebAttendant controls. Each
Cisco WebAttendant DLL tries to start a
multimedia timer when the DLL is loaded.
Starting the timer was moved from the
loading of the DLL to when the actual
loading of the control by the web browser
occurs. This allows the regsvr32.exe to load
and register the DLL.
A changed was made previously to save
information about the calling, called, and
redirected parties during call setup, so this
information can be returned in the
lineGetCallInfo when the call is forwarded.
These changes were made to the code that
handles the stations but also needed to be
made to the code that handles route points.
The problem was corrected by using a timer
to introduce a delay between sending the
response and closing the pipe.
Release Notes for Cisco CallManager Release 3.0(10)
Resolved Caveats
53