Cisco CallManager Release 3.0(10 Specification page 84

Documentation Updates
Table 9 Cisco CallManager Service Parameter Updates
ParamName Values
CTIRequestTimeo Default: 5 (seconds)
ut
DtSilenceFlag Default: F
Release Notes for Cisco CallManager Release 3.0(10)
84
Description
Specifies timeout interval. Timer ensures
responses to CTI requests are generated
for situations where network or remote
Cisco CallManager node problems
prevent the normal processing of the CTI
requests.
This timer services the following specific
CTI requests:
LINE_CALL_INITIATE_REQUEST
•
CALL_ACCEPT_REQUEST
•
CALL_ANSWER_REQUEST
•
CALL_BLIND_TRANSFER_REQUE
•
ST
CALL_DISCONNECT_REQUEST
•
CALL_HOLD_REQUEST
•
CALL_RETRIEVE_REQUEST
•
CALL_SETUP_CONFERENCE_REQ
•
UEST
CALL_SETUP_TRANSFER_REQUE
•
ST
Designates whether silence plays. When
this flag is set, the digital gateway does
not play silence after receiving the Alert
message. This may enable a full duplex
path before the Connect message is
received on ISDN calls.
78-13493-02