Cisco CallManager Release 3.0(10 Specification page 30

Resolved Caveats
Table 2 Cisco CallManager Release 3.0(10) Resolved Caveats (continued)
DDTS Number Summary
CSCdu68211 The default SdlTraceTypeFlags value is
inadequate for debugging needs.
CMTerminals -- Firmware
CSCdt68876 WS-X6608 port resets when setting up a
FAX call.
CSCdt97510 DTMF tones are sometimes not sent
through 6608 PRI from IP phone.
CSCdu09034 Phones lose IP leases at renewal. They
are forced to unregister from the
Cisco CallManager and acquire a new
IP address.
Release Notes for Cisco CallManager Release 3.0(10)
30
Explanation
The default value SdlTraceTypeFlags
changed to 0x00004B15. This change only
occurs on new installs. On upgrade
installations, the previous setting for the
"SDLTraceTypeFlags" service parameter
remains at 0x00004B05.
Customers who install Cisco CallManager
3.0(10) for the first time receive this bug fix.
A customer who upgrades to
Cisco CallManager 3.0(10) does not
receive a bug fix for this.
During an upgrade, Cisco CallManager
does not overwrite service parameter values
manually configured by the system
administrator in Cisco CallManager
Administration.
A code change resolves a problem that was
causing a timer to restart, which initially
caused this caveat.
A code change corrects this behavior.
A problem no longer exists in
Cisco CallManager Release 3.0(10).
78-13493-02