Turning On The System; Equipment Description - Furuno DP-6 Operator's Manual

2.2 Turning on the System

2.3 Equipment Description

1:File 2:Edit 3:Operate 4:Window 5:Station 6:System 7:WRU 8:HR 9:Over 10:Break
Station Name
Frequency (T/R) :
Comm Status
Sending Volume
2-2
There is no particular order for turning on the units of the system.
The figure below shows the location of power switches on the units
of the system. Note that it takes about six seconds for the LCD to
light after the power is turned on.
POWER switch
MAIN UNIT
Figure 2-2 Main unit, terminal unit and printer
Terminal Unit
The terminal unit consists of a 9" visual display, a floppy disk drive
and a keyboard. The floppy disk drive provides for unlimited stor-
age of files on floppy disks. Controls for power and adjustment of
display brilliance and contrast are provided on the front panel.
When the terminal unit is turned on the communication status dis-
play appears. This is where all phases of communication begin.
:
/
: Connect Send Lock Error
: (%) ARQ Error : 0
Figure 2-3 Communication status display
PRINTER
1996-11-15 13:26:45:45
(kHz) Comm Mode : Auto
ARQ Time : 0(sec)
POWER switch
TERMINAL UNIT
POWER switch
Caps Eng