Furuno DP-6 Operator's Manual page 22

2-10
Function key [F6]: System menu
The System menu is mainly for use by technicians and includes
diagnostic tests (self test). To change settings, select Change on
the Setup line and operate arrow keys to select item and option.
Press the [Enter] key to register selection and close the menu.
Setup
Slave Delay
BK Timing PreTone
PostTone
Mute Timing PreBK
PostBK
Modem Output Level
MIF Tune
Freeze
AGC
Emission
TX/RX MSG Save
Edit Before sending
Time System
Time & Date
Display Mode
Self Test
Figure 2-12 System menu
Setup
Slave Delay
BK Timing PreTone
BK Timing PostTone Sets the timing for the trailing edge of
Mute Timing PreBK
Mute Timing PostBK Sets the timing for the trailing edge of
Modem Output Level Sets modem output level.
MIF Tune
System
Lock Change
5 msec (0- 50 msec)
10 msec (0-100 msec)
0 msec (0- 20 msec)
0 msec (0- 20 msec)
0 msec (0- 20 msec)
0 dBm (-30 - +10 dBm)
OFF O N
OFF O N
OFF O N
OFF O N
OFF O N
OFF O N
OFF UTC SMT JST
1997/3/16/10:00:00
Normal Reverse
Locks, enables change or restores default
system settings.
Sets the length of the slave delay timing
in the ARQ mode.
Sets the timing for the leading edge of
the BK signal in the ARQ mode.
the BK signal in the ARQ mode.
Sets the timing for the leading edge of
the mute signal in the ARQ mode.
the mute signal in the ARQ mode.
Turn on to send antenna coupler tuning
command. (Requires FURUNO Radio
Equpment.)
Default