User Channels - Furuno DP-6 Operator's Manual

3.5 User Channels

4. Do one of the following;
Editing channels: Press the [Backspace] key to delete the chan-
nel number and then enter new channel number.
Adding channels: Enter channel number on a blank line.
Deleting channels: Delete group name with the [Backspace]
key.
Disabling channels temporarily: Press the [ ] key to under-
line Pass.
5. Press the [Enter] key twice.
6. Press the [Esc] key.
The user channel list provides storage for up to 100 user channels,
numbered 0 – 99. Note that user channels may be used in channel
scanning.
Registering User Channels
1. Press function key [F5] and then the [4] key. The User Channel
Entry screen appears.
User Channel Entry
Channel List
Channel Set Up
Channel :
Tx Freq :
Rx Freq :
Figure 3-9 User channel entry screen
2. If Create is not underlined, press [ ], [ ] and the [Enter] key
to underline it.
3. Enter channel number on the Channel line.
4. Advance the cursor to the Tx Freq line. Enter Tx frequency.
5. Advance the cursor to the Rx Freq line. Enter Rx frequency.
Create
Change
0.00
0.00
3-9