Transmission, Reception; Manual Calling - Furuno DP-6 Operator's Manual

5.1 Manual Calling

5. TRANSMISSION, RECEPTION

This chapter shows you how to transmit and receive Telex mes-
sages. Also included are the procedures for frequency scanning,
and automatic operation.
The simplest way to communicate with a Telex subscriber is Manual
Calling. For the ARQ mode, you may display beforehand the mes-
sage to send or type message manually.
1. Press function key [F3] to display the Operate menu.
1: Call Station
2: Macro Operation
3: File to Send
4: Cancel Sending
5: Scan (Start/Stop)
6: Manual Reception
7: Timer Operation
8: High Tension ON
9: Manual Calling
0: Set Frequency
Figure 5-1 Operate menu
2. Press the [0] key. The Set Frequency screen appears.
Set Frequency
Tx Freq:
RX Freq:
Figure 5-2 Set frequency screen
Operate
0.00
0.00
5-1