WARNING
Be sure that the power supply is
compatible with the voltage rating of
the equipment.
Connection of an incorrect power supply
can cause fire or equipment damage. The
voltage rating of the equipment appears
on the label above the power connector.
Use only the specified power cable.
Fire or equipment damage can result if a
different cable is used.
CAUTION
Ground the equipment to
prevent electrical shock and
mutual interference.
Observe the following compass safe
distances to prevent deviation of a
magnetic compass:
Standard
compass
Display
1.70 m
Unit
Scanner Unit
1.70 m
(2115)
Scanner Unit
2.10 m
(2125)
Steering
compass
0.90 m
1.90 m
1.20 m
ii
POWER Switch in AC
Powered Display Unit
The display unit designed to run on AC
power has a power switch inside its
base which cuts off 100/200 VAC power
to the display unit. Pull the display unit
forward several centimeters to access
the switch. TURN THE SWITCH OFF
(as well as the main POWER switch)
WHENEVER ACCESSING INSIDE THE
DISPLAY UNIT.
POWER Switch
J106
J105
J104
J103
J446
J466
J462
J465
Display unit, inside view