Working With Track; Displaying Track - Furuno COLOR VIDEO PLOTTER 1833C Operator's Manual

3. PLOTTER OPERATION
3.6

Working with Track

Your ship's track is plotted on the screen using navigation data fed from
position-fixing equipment. This section shows you what you can do with track,
from turning it on or off to changing its plotting interval. In the default setting, own
ship's track is turned on and is displayed in red.
3.6.1

Displaying track

Own ship track
1. Press the [MENU] key followed by the CHART SETUP and TRACKS &
MARKS CONTROL soft keys to open the TRACK CONTROL menu.
2. Use the trackball to select OWN SHIP TRACK DISP.
3. Press the EDIT soft key to show the track display window.
4. Use the trackball to select ON (default setting) or OFF as appropriate.
5. Press the ENTER soft key.
6. Press the [MENU] key to close the menu.
Note: The number of track and mark points used appears at the SHIP'S TRACK
STATUS window on the TRACK CONTROL menu. Using the figure above
as an example, 1234 points of track and 9 marks have been recorded.
3-18
OWN SHIP TRACK DISP
OWN SHIP TRACK COLOR RED
TARGET TRACK DISPLAY
TARGET TRACK COLOR
INTERVAL
TIME INTERVAL
DISTANCE INTERVAL
MEMORY(TRACK & MARK) 2000 POINTS
(MARK MEMORY)
SHIP'S TRACK STATUS
TRACKING
TRACK: 1234/2000
MARK : 9/6000
Track control menu
TRACK
ON
CONTROL
ON
EDIT
WHITE
TIME
TRACK
00m10s
RESUME
00.10nm
ERASE
T & M
(6000)POINTS
MARK
SETUP
RETURN