Navigator Setup; Navigation Data Source - Furuno COLOR VIDEO PLOTTER 1833C Operator's Manual

5.7

Navigator Setup

This section provides the information necessary for selecting the type of
navigator connected to your plotter.
5.7.1

Navigation data source

The NAV
SETUP menu
mainly selects
the source of
nav data. For
GPS receiver
other than the
GP-310B,
speed
averaging and
local time
offset (to use
local time) are also available. Press the [MENU] key followed by the SYSTEM
CONFIGURATION, NAV OPTION and NAV SOURCE SETTINGS soft keys to
display this menu.
Item
Chooses source of position data.
Position
Source
Calculation of ETA is based on
Speed
average ship's speed over a given
Averaging
period. If the period is too long or too
short, calculation error will result.
Change this setting if calculation error
occurs. The default setting is suitable
for most conditions.
GPS uses UTC time. If you would
Local Time
rather use local time, enter the time
Offset
difference between it and UTC. Use
the + <- -> - soft key to switch from
plus to minus and vice versa.
Offsets NMEA water temperature data. -40°F - 40°F
Temp
Calibration
Offsets NMEA depth data.
Depth
Calibration
POSITION SOURCE
SPEED AVERAGING*
LOCAL TIME OFFSET*
TEMP CALIBRATION
DEPTH CALIBRATION
Contents of nav setup menu
Description
5. CUSTOMIZING YOUR UNIT
NAV
ALL
SETUP
0060second(s)
+00:00
EDIT
00 ° F
* For GPS receiver othe
00ft
RETURN
Settings
FURUNO BB GPS: GPS
Receiver GP-310B
GP: GPS navigator (via
NETWORK or NMEA port)
LC: Loran C navigator (via
NETWORK or NMEA port)
ALL: Multiple navaid connection
(via NETWORK or NMEA port)
0-9999 seconds
-13:30 to +13:30 hours
-15 - +90 ft
than GP-310B.
Nav setup menu
Default
Setting
ALL
60
seconds
00:00
0°F
0 ft
5-21