Working With Track; Displaying Track - Furuno 1722C Operator's Manual

3. PLOTTER OPERATION
3.6

Working with Track

Your ship's track is plotted on the screen using navigation data fed from a
navigation receiver. This section shows you what you can do with track, from
turning it on or off to changing its plotting interval. Own ship's track is displayed
in the default setting and on the color model it is red.
3.6.1

Displaying track

Own ship track
1. Press the [MENU] key followed by the CHART SETUP and TRACKS &
MARKS CONTROL soft keys to open the TRACK CONTROL menu.
OWN SHIP TRACK DISP
OWN SHIP TRACK COLOR
TARGET TRACK DISPLAY
TARGET TRACK COLOR
INTERVAL
TIME INTERVAL
DISTANCE INTERVAL
MEMORY(TRACK & MARK)
SHIP'S TRACK STATUS
TRACKING
TRACK: 1234/2000
MARK :
2. Use the cursor pad to select OWN SHIP TRACK DISP.
3. Press the EDIT soft key to show the track display window.
4. Use the cursor pad to select ON (default setting) or OFF as appropriate.
5. Press the ENTER soft key.
6. Press the [MENU] key to close the menu.
Note: The number of track and mark points used appears at the SHIP'S TRACK
STATUS window on the TRACK CONTROL menu. Using the figure above
as an example, 1234 points of track and 9 marks have been recorded.
3-18
TRACK
CONTROL
ON
RED
EDIT
ON
TRACK
RESUME
WHITE
ERASE
TIME
00m10s
MARK
00.10nm
2000PTS
RETURN
(MARK MEMORY)
(6000)POINTS
9/6000
MODEL1722C series
Track control menu
OWN SHIP TRACK DISP
ON
TARGET TRACK DISPLAY
ON
INTERVAL
TIME
TIME INTERVAL
00m10s
DISTANCE INTERVAL
T & M
00.10nm
MEMORY(TRACK & MARK)
2000PTS
SETUP
(MARK MEMORY)
(6000)POINTS
SHIP'S TRACK STATUS
TRACKING
TRACK: 1234/2000
MARK : 9/6000
MODEL1722 series
TRACK
CONTROL
EDIT
TRACK
RESUME
ERASE
T & M
MARK
SETUP
RETURN