Working With Track; Displaying Track - Furuno NAVNET 1722 Operator's Manual

3. PLOTTER OPERATION
3.6

Working with Track

Your ship's track is plotted on the screen using navigation data fed from a
navigation receiver. This section shows you what you can do with track, from
turning it on or off to changing its plotting interval. Own ship's track is displayed
in the default setting and on the color model it is red.
3.6.1

Displaying track

Own ship track
1. Press the [MENU] key followed by the CHART SETUP and TRACKS &
MARKS CONTROL soft keys to open the TRACK CONTROL menu.
OWN SHIP TRACK DISP
OWN SHIP TRACK COLOR
TARGET TRACK DISPLAY
TARGET TRACK COLOR
INTERVAL
TIME INTERVAL
DISTANCE INTERVAL
MEMORY(TRACK & MARK)
TRACKING
2. Use the cursor pad to select OWN SHIP TRACK DISP.
3. Press the EDIT soft key to show the track display window.
4. Use the cursor pad to select ON (default setting) or OFF as appropriate.
5. Press the ENTER soft key.
6. Press the [MENU] key to close the menu.
Note: The number of track and mark points used appears at the SHIP'S TRACK
STATUS window on the TRACK CONTROL menu. Using the figure above
as an example, 1234 points of track and 9 marks have been recorded.
3-18
ON
RED
ON
WHITE
TIME
00m10s
00.10nm
2000PTS
(MARK MEMORY)
(6000)POINTS
MODEL1722C/1723C series
Track display window
TRACK
OWN SHIP TRACK DISP
CONTROL
TARGET TRACK DISPLAY
EDIT
INTERVAL
TRACK
RESUME
TIME INTERVAL
ERASE
DISTANCE INTERVAL
T & M
MEMORY(TRACK & MARK)
MARK
SETUP
(MARK MEMORY)
RETURN
TRACKING
MODEL1722 series
Track control menu
TRACK DISPLAY
¤
ON
¡
OFF
TRACK
CONTROL
ON
EDIT
ON
TIME
TRACK
RESUME
00m10s
ERASE
T & M
00.10nm
2000PTS MARK
SETUP
(6000)POINTS
RETURN